Step One: Get Your Stuff Together
|Stiff (dandy, body) Brush|
Artistic license is allowed in fleshing out your grooming kit, but the
above list includes the bare bones essentials. I learned some time ago that
good grooming tools are worth the extra cost. Not only will they last much
longer but chances are that they will be better designed to suit the purpose.
Buy brushes that fit your hand! As a woman, I can't possibly wrap my hand
comfortably around a man-sized brush. Likewise men must be frustrated if made
to use tools that are too small for them. If your brushes don't fit your hand
you'll most likely find yourself chasing them across the aisle during your
Give some thought to the horse in choosing your brushes.
If you have several horses you'll probably need several different combinations
of brushes. In order for the process of grooming to be pleasant to the horse,
his level of sensitivity must be taken into account. If your horse has a thin,
short coat, a very stiff brush will go straight to his skin and feel like a
rasp! On the other hand, if he has a slightly longer and very thick coat, a
soft brush will just bounce off his natural thatching and do nothing to remove
the dirt lurking beneath. A bit of thoughtfulness and courtesy on your part
will go a long way to making your daily grooming sessions a pleasure for both
you and your horse.
Step Two: The Grooming
Develop a routine and stick to it. A routine
insures you won't forget any important aspect (like picking out the feet) and
your horse will be soothed and relaxed by the consistency of your pattern.
Following in my preference for the grooming routine.
- To make detangling the tail easier, I begin my grooming routine by
applying a dab of Cowboy Magic (similar products probably work just as well)
If the tail has been groomed daily, just a light spray will be necessary to
insure that your brush slips right through any tangles without pulling out
the hairs (tail hairs take 3-5 years to reach their full length so it's
important not to remove any healthy ones in your daily grooming routine). A
word of caution: Show Sheen leaves the hairs very slippery and I don't
recommend using it on the mane or body if you want to be able to hold onto
your reins or keep your saddle in place! At this time I'll also use my
secret weapon, Showtime on any manure
and dirt stains. While my sprays are drying I go on to step 2.
- Pick out the feet - and don't be shy. Make your you get into every nook
and cranny if you don't want to deal with thrush or "gravels." Years ago I
read a great little book called GROOMING RACE HORSES in which the author
said, "No stud groom worth his salt would waste his employer's time and
money by walking all the way around the horse to pick out the feet." Since I
considered myself "worth my salt," I have ever since taught all of my horses
to allow me to pick all four feet from the same side. I must admit that they
initially think I'm a little odd when I pull the off foot toward me while
standing on the near side of their body, but they quickly catch on and it
really does save time!
- Top show stables with hot and cold running grooms wouldn't think of
using any implement other than human fingers to separate and detangle the
tail. If your budget doesn't include such amenities and you'd like to groom
at 5pm and ride before midnight, you'll probably use some kind of mane/tail
brush or comb. Most any kind of grooming implement, from a metal comb to a
stiff brush can successfully be used without pulling out the hairs, provided
the technique used is correct. This technique works well for me and my
horses all have lovely tails: take the entire tail in your left hand and run
your hand down toward the bottom of the tail until only a couple of inches
remain below your hand. Hold the tail hairs against your thigh and gently
use your brush (I prefer the plastic knob-end bristle brush that you
probably use on your own hair) to separate the ends of the hair. When you
can comb easily through these few inches, move your left hand a little
further up the tail so that you comb through the bottom 4-5 inches tail
hair. Now you can remove it from your leg and comb through it hanging in the
air. Continue to work your way up the tail - when it becomes too thick to
comb through the entire mop at one time, you can let a few hairs drop and
hang free and comb the tangles gently out of them, gradually adding more and
more dropped sections until the whole tail is tangle free. When you
encounter any resistance as you're brushing, let the brush roll out of the
tangle - do not force the brush through the tangle - and begin brushing
again below the tangle, slowing working your way up to and through it. If
you handle the tail in this fashion you will not remove any healthy hairs (a
small amount of hairs will be shed daily, so you may find that 2 or 3 come
out during your grooming) and your horse will sport a luxuriously thick,
healthy tail. I do not advocate braiding and/or keeping a tail in a "tail
sack." As a matter of fact, I think that such care actually contributes to
the breaking of hairs and results in a thinner tail.
- If your horse has
been turned out for some time and not groomed regularly, you may be greeted
with a great "witch's knot" in his tail or mane (or both, if you're really
unlucky!). Don't get out your pocket knife and start whacking on it -
instead spray it liberally (until it's wet) with Cowboy Magic or a similar
hair polish. When it has dried, take your brush and gently work through the
hair as described above. With a little patience you'll be able to work the
entire snarl out and with relatively little hair loss! Your tail brush
will serve equally well for use on the mane.
- The first tool to use on the horse's body is the curry comb which
loosens the dirt, scurf and dandruff and massages the skin and muscle
beneath the coat. Use a circular or side-to-side motion, pressing down
firmly on heavily muscled areas and rubbing lightly on tender spots.
Frequently knock the loose dirt out of the curry by banging it against the
back of a brush, the bottom of your boot or the floor (please don't use the
wall for this purpose - at least not in my stable).
- Next select your
body (or dandy) brush and use vigorous, short, snapping strokes to make sure
the brush penetrates the hair coat and gets down to the skin. The body brush
sweeps the skin free of larger particles of loosened by the curry. A
short-bristled brush with a mixture of horsehair and stiffer fibers (even
interspersed with brass bristles for the more heavily-coated horse) is
recommended for this step. It's very important that this brush be selected
according to your horse's sensitivity since, in order to be effective, it
must penetrate all the way down to the skin. If your horse shows discomfort
at this stage of grooming, select a softer brush with more horsehair and
fewer stiffer fibers. Clean the body brush frequently by brushing the
bristles across your curry to dislodge the accumulated dirt and scurf. This
keeps your brush clean and prevents putting the dirt right back onto the
horse. The more frequently you repeat this action, the less often you'll
need to wash your grooming kit.
- The skin is now clean but the hair will be filled with a fine dust and the whitish, greasy dust called scurf.
The finishing brush removes this
residue as well as distributing the sebum (or skin oil) uniformly throughout
the horse's coat. The finishing brush is the most important tool in grooming
and produces a deep bloom and gloss to the coat. It will also likely be the
most expensive brush in your grooming kit, but well-cared for, it will give
you years of service. Since the finishing brush will pick up a considerable
amount of dust and scurf as you work, it cannot be stressed too much that
the bristles must be cleaned as you go by brushing it across your curry.
- To remove the last of the dust, spread the sebum over the hair coat and
bring up the shine, rub the horse thoroughly with a soft rag. I like to use
our Sheepskin Grooming
Mitt with a little Showtime spayed on it to
leave the coat luxuriously soft.
- Go ride!
Step Three: Care of Your Grooming
Keep your grooming kit clean if you want to keep
your horse clean! If you're meticulous about using the curry to keep the dust
and dirt from building up in your brushes, you won't need to wash them very
frequently. To wash your brushes, fill a bucket with lukewarm water and add
enough soap flakes to suds (I never recommend using any kind of detergent on
anything that will touch your horse's skin - use Ivory Snow or a similar soap
product). Leave your brushes soaking until all the grime has come loose then
rinse thoroughly and leave to dry bristle-side down. If you have leather or
wooden backed brushes, keep the water level shallow enough that the backs will
not be immersed in water.
This brochure is compliments of Tack In The
© May 1994
Tack In The Box
2413 82nd Ave. S.E.
Toll Free: 888/GET-TACK (438-8225)
© 2000 - 2010 Show Horse Promotions
All Rights Reserved
The Show Horse Promotions web site is an informational web site, this information is subject to change without notice. Any use of, or actions taken based upon any of the information contained on this web site is done entirely at your own risk.
Show Horse Promotions expressly prohibit you from republishing or redistributing this content without first receiving
our written consent. By using this site, you agree not to hold us liable for
any errors or delays in this content, or for any actions that you take in reliance thereon. This site contains links
to other Internet sites. These links are not endorsements by us of any products or services in those sites, and we have not
endorsed or approved any information in those